XỬ LÝ NƯỚC BẰNG CÔNG NGHỆ SMF

XỬ LÝ NƯỚC BẰNG CÔNG NGHỆ SMF

  • Thông tin chi tiết

Thông tin chi tiết

Featur​e
1.Dry membrane,permanent hydrophilic, easy to clean

The permanent hydrophilicity improves the performance of high pollution resistance, reduces the cleaning
requirements and prolongs the lifespan of the membrane.

2.High mechanical strength without fiber breakage
Membrane tensile strength is more than 300N,which avoids fiber breakage.

3.High peeling-off strength
The membrane’s separation layer and lining support layer are coated tightly.It can withstand frequent backwash
without fiber breakage.

4.Membrane pore size is small and well-distributed
The membrane average pore size is 0.03μm,which ensures water quality.It removes suspended solids,bacteria,
colloids and viruses.

5.High chemicals resistance,easy to clean
The membrane elements could be washed by oxidant,inorganic acid or organic acid in the harsh industrial sewage
treatment environment, to ensure the membrane system operate stable.

Specification

TYPE SSF-30A SSF-35A
Effective membrane area 30㎡ 35㎡
Membrane material Reinforced PVDF
Membrane type Outside-to-inside hollow fiber
Outside diameter 2.2mm
Nominal pore size 0.03μm
Turbidity of permeate water ≤0.2NTU
Dimension(L×W×H) ⌀824×46×2200mm ⌀824×46×2400mm
Transport weight(Dry condition) 12kg 14kg
Operating weight(Wet condition) 25kg 30kg
Application condition
Model SSF-30A SSF-35A
Feed condition Operating temperature 5-40℃
pH range 2-10
Air scour flux 60-120Nm³/(h·m²) (projected area)
Chemical cleaning pH range 1-11
Max.NaCIO cleaning concentration 5000mg/L
Design flux 22-45L/㎡·h,25℃ 30-45L/㎡·h,25℃
Backwash flux 55-70L/㎡·h
System operation Intermittent permeate, continuous aeration
Permeate water Turbidity of permeate water ≤0.2NTU
SS ≤2mg/L

Note:
1.The actual permeate and backwash flux depends on system’s operation and maintenance condition.
2.The permeate water quality may varify according to feed water condition.