XỬ LÝ NƯỚC BẰNG CÔNG NGHỆ UF
- Thông tin chi tiết
Thông tin chi tiết
System process
Module dimension(mm)
Specification
| TYPE | 6060 | 8060 | 8080 | |
| Specification | Membrane material | PVDF | ||
| Membrane structure | Outside-to-side | |||
| Nominal pore size | 0.03μm | |||
| Fiber inside/outside diameter | 0.7mm/1.3mm | |||
| Effective membrane area | 35㎡ | 55㎡ | 75㎡ | |
| Dimension | Dimension | ⌀160×1814mm | ⌀225×1757mm | ⌀225×2257mm |
| Inlet/outlet connection | DN40 | DN50 | DN50 | |
| Weight | Wet condition | 42kg | 75kg | 92kg |
| Filtration type | Dead-end/Cross-flow | |||
| Turbidity of permeate water | ≤0.1NTU | |||
| SDI15 | ≤3.0 | |||
Application condition
| Feed condition | Turbidity | ≤300NTU |
| pH | 2-10 | |
| Prefiltration accuracy | 100-300μm | |
| Operating temperature | 1-40℃ | |
| Design flux | 30-120L/㎡·h,25℃ | |
| Max.filtrating trans-membrane pressure | 0.2MPa | |
| Backwash condition | Backwash frequency | 20-60mins/time |
| Backwash max.filtrating trans-membrane pressure |
≤0.2MPa | |
| Backwash flux | 80-120L/㎡·h | |
| Air cleaning condition | Inlet pressure | ≤0.25MPa |
| Air scour flux | 4-10Nm³/h·㎡（projected area） | |
| Chemical Enhanced Backwash | Frequency | Adjust according to water quality or pilot test |
| Cleaning solutions | 0.1%HCl,0.05%NaOH+0.1%NaClO(Adjust according to water quality) | |
| Chemical In Place | Frequency | Filtrating trans-membrane pressure is increased to 0.08-0.1MPa |
| Cleaning solutions | 2%Oxalic acid,1-2%Citric acid or 0.4%HCl acid,0.1%NaOH+0.2%NaClO | |
Feature
1.Seamless repacement
2.Low energy consumption
3.Long lifespan
4.High water quality
5.Prolonged wash cycle
Specification
| Model | Revita RP-8060D | Revita RP-8080D | |
| Specification | Membrane material | PVDF | |
| Active membrane area | 52㎡ | 77㎡ | |
| Nominal pore size | 0.03um | ||
| Inside/outside diameter | 0.7/1.3mm | ||
| Membrane structure | Outside-to-inside hollow fiber | ||
| Dimension | Dimension(L×W×H) | ⌀225*1860mm | ⌀225*2360mm |
| Connector | DN50 | ||
| Material | Shell material | UPVC | |
| Encapsulating material | Epoxy resins/Polyurethane | ||
| Weight | Dry condition | 75kg | 92kg |
Application condition
| Backwash condition | Frequency | Every 20-60mins(According to water quality or pilot testing result) |
| Pressure | ≤0.2Mpa | |
| Flux | 80-120L/㎡·h | |
| Air cleaning condition | Air pressure | ≤0.2Mpa |
| Air scour flux | 4-10Nm³/h·㎡(projected area) | |
| Chemical Enhanced Backwash | Frequency | Every 12-24h(According to water quality or pilot testing result) |
| Cleaning solutions | 0.1%HCI(Adjust according to water quality) | |
| 0.05%NaOH+0.1%NaCIO(Adjust according to water quality) | ||
| Clean In Place | Frequency | TMP exceeds 0.08-0.1Mpa,and the flux cannnot recover from backwash,air scour and Chemical Enhanced Backwash |
| Cleaning solutions | 2% Oxalic,1-2% Citric or 0.4%HCI | |
| 0.1%NaOH+0.2%NaCIO(Active Chlorine) |
Note:
1.The actual permeate and backwash flux depends on system’s operation and maintenance condition.
2.The permeate water quality may varify according to feed water condition.
